What We Fix on Roper
By appliance. Roper reaches us almost entirely as older laundry, so the list is short and specific.
What Roper Machines Are Like to Work On
Roper is made by Whirlpool
Because every Roper is an older Whirlpool-built machine, the faults are mechanical (belt, roller, element, thermostat) and the parts are cheap, so most Roper repairs are worth doing.
Whirlpool parts, despite the badge being gone
The parts that fail on these are Whirlpool parts, so they are still easy to get despite the badge being long gone.
Is It Worth Keeping?
More often than people assume. The reflex with a machine that age is to scrap it.
The argument against that reflex is the one on the repair-or-replace page: older machines were built better than a good deal of what is on the showroom floor now, and a Roper with a bad belt or a bad element is a cheap repair on a machine that has already proved it lasts. You will still get an honest answer if the fault is an expensive one.
The same question on every other appliance→
What It Costs
$100 service call, applied to the repair.
No published prices. On a machine this old the more useful question is usually whether to repair at all, and you will get a straight answer on that before a number.
One all-in figure if you go ahead.
How the Visit Goes
Ten Years and Up, Which Changes the Conversation
So the repair-or-replace question is not a footnote on this page, it is the main event. His rule is that once a repair passes about half the cost of replacing the machine, replacing it is usually the better call, and on a machine this age that line is genuinely reachable.
The part that surprises people is which way it usually falls. A Roper is a Whirlpool underneath, the parts are easy to get and they are not expensive, and the faults on these machines are the mechanical ones rather than the electronic ones. A belt, a roller, a heating element or a thermostat on an old Roper dryer is very often a repair worth making. Where it goes the other way is a control board, or a machine that has more than one thing wrong with it at once. You will hear that before anything is ordered.
Roper Still Publishes Where Its Model Plate Is
Worth noting on a badge this rare: Roper maintains its own owner-support page, and it tells you exactly where to look on both machines.
Trussville is the one town whose utility publishes descaling advice of its own
What Customers Say
Every review Aaron has, live from Google, in the customer's own words and under their own name.
Questions We Get Asked
Is an old Roper worth repairing?
Often yes, and that is not a sales answer. Older machines were built better than a lot of what is on the showroom floor now, and Roper is a Whirlpool underneath with parts that are easy to get. The repair-or-replace page has the full reasoning.
Are the parts still out there for something this rare?
Yes, because they aren't really Roper parts. They are Whirlpool parts, and those are the easiest to get in this market.
How old are the Ropers you actually see?
Ten years and up, every one of them. There is no three-year-old Roper in this service area, because the badge left the showrooms long before that.
Does the rare badge make the repair more expensive?
No. The price follows the part, and the part is a Whirlpool part at a Whirlpool price.
Warranty?
Ninety days on parts and labor, however old the machine.
Every service this brand comes up on
Each of these has its own page with the faults, the parts reality and the model-plate location for that badge.
Where We Work, and How to Reach Us
Roper repair across the Birmingham metro. These machines turn up most often in the older housing north of the city.
Call or text (205) 883-9703. On an older machine the model plate is often the fastest way to work out what will fit.
Calls and texts Monday to Friday, 8am to 5pm, and Saturday too; Sunday goes to voicemail.
Every town we cover